Home / Institute / Publications / Chapters of Books and Articles in Journals: 2010
Selected Publications

Chapters of Books and Articles in Journals: 2010

  1. Andersons J., Tarasovs S., and Spārniņš E. Finite Fracture Mechanics Analysis of Crack Onset at a Stress Concentration in a UD Glass/Epoxy Composite in Off-Axis Tension // Composites Science and Technology. – Vol. 70 (2010), p. 1380-1385.
  2. Andersons J. and Joffe R. Initiation and Propagation Controlled Intralaminar Cracking in Cross-Ply Laminates // Encyclopedia of Polymer Composites: Properties, Performance and Applications / eds. M. Lechkov and S. Prandzheva. – [S. l.]: Nova Science Publishers, Inc., 2010. – Ch. 13, p. 477-510.
  3. Aniskevich K., Starkova O., Jansons J., and Aniskevich A. Deformational Properties of Silica Filled Styrene-Butadiene Rubber under Uniaxial Tension // Rubber: Types, Properties and Uses / ed. by G. A. Popa – New York: Nova Science Publishers, Inc., 2010. – P. 455-476. – (Materials Science and Technology). – ISBN 978-1-61761-652-5; NOVA Publishers.
  4. Gaidukov S., Maksimov R. D., Kalnins M., Zicans J., and Krutohvostov R. Structure and Mechanical Properties of Melt Intercalated Polypropylene-Organomontmorillonite Nanocomposites // Composite Interfaces. – Vol. 17, No. 5-7 (2010), p. 705-715; IngentaConnect.
  5. Glaskova T. and Aniskevich A. Moisture Effect on Deformability of Epoxy/Montmorillonite Nanocomposite // Journal of Applied Polymer Science. – Vol. 116, No. 1 (2010), p. 493-498.
  6. Grāpis O., Ohlson N.-G., and Andersons J. Rotor/Frame Contact in a Centrifuge Installed on Board a Ship // Proceedings of the Institution of Mechanical Engineers: Part C: Journal of Mechanical Engineering Science. – Vol. 224 (2010), p. 635-646.
  7. Kerch G. and Korkhov V. Effect of Storage Time and Temperature on Structure, Mechanical and Barrier Properties of Chitosan-Based Films // European Food Research and Technology = Zeitschrift für Lebensmittel- Untersuchung und -Forschung A. – Vol. 232, No. 1 (2010), p. 17-22; DOI:10.1007/s00217-010-1356-x
  8. Leterrier Y., Pinyol A., Rougier L., Waller J., Månson J.-A., Dumont P., Andersons J., Modniks J., Campo M., Sauer P., and Schwenzel J. Influences of Roll-To-Roll Process and Polymer Substrate Anisotropies on the Tensile Failure of Thin Oxide Films // Thin Solid Films, Vol. 518 (2010), p. 6984-6992; ScienceDirect.
  9. Maksimov Robert D. Barrier Properties of Styrene-Acrylate Copolymer Nanocomposites // Barrier Properties of Polymer Clay Nanocomposites / ed. Vikas Mittal. – New York: Nova Science Publishers, Inc., 2010. – Ch. 10, p. 213-229. – (Nanotechnology Science and Technology Series).
  10. Modniks J. and Andersons J. Modeling Elastic Properties of Short Flax Fiber Reinforced Composites by Orientation Averaging // Computational Materials Science – Vol. 50 (2010), p. 595-599; ScienceDirect.
  11. Shtrauss V., Kalpinsh A., and Lomanovskis U. Deconvolution Filters for Determination of the Distribution of Relaxation and Retardation Times, // Telecommunications and Electronics / Scientific Proceedings of Riga Technical University. Ser. 7. – Riga: RTU, 2010. – Vol. 10, p. 26-31; Scientific Journal of RTU.
  12. Shtrauss V. Determination of Relaxation and Retardation Spectrum by Inverse Functional Filtering // Journal of Non-Newtonian Fluid Mechanics. – Vol. 165 (2010), p. 453-465; ScienceDirect.
  13. Starkova O. and Aniskevich A. Poisson’s Ratio and the Incompressibility Relation for Various Strain Measures with the Example of a Silica-Filled SBR Rubber in Uniaxial Tension Tests // Polymer Testing. – Vol. 29 (2010), p. 310-318.
  14. Tarasovs S., Andersons J., and Leterrier Y. Estimation of Interfacial Fracture Toughness Based On Progressive Edge Delamination of A Thin Transparent Coating on a Polymer Substrate // Acta Materialia. – Vol. 58 (2010), p. 2948-2956.
  15. Анискевич К., Старкова О., Янсон Ю., Анискевич А. Вязкоупругие свойства наполненной кремнеземом стирол-бутадиеновой резины при одноосном растяжении. – Библиограф.: с. 565-[566] (16 назв.). – Аннот. на англ. яз. // Механика композитных материалов. – Т. 46, N 4 (2010), с. 549-566.
    Aniskevich K., Starkova O., Jansons J., and Aniskevich A. Viscoelastic Properties of Silica-Filled Styrene-Butadiene Rubber under Uniaxial Tension. – Bibliogr.: p. 386 (16 ref.) // Mechanics of Composite Materials. – Vol. 46, No. 4 (2010), p. 375-386;SpringerLink.
  16. Зиле Э., Тамужс В. Неупругое деформирование круглых бетонных колонн при трехосном сжатии. – Библиограф.: с. 265-[266] (10 назв.). – Аннот. на англ. яз. // Мех. композ. матер. – Т. 46, N 2 (2010), с. 253-[266].
    Zīle E. and Tamužs V. Inelastic Deformation of Round Concrete Columns in Triaxial Compression. . – Bibliogr.: p. 181-182 (10 ref.) // Mech. Compos. Mater. – Vol. 46, No. 2 (2010), p. 173-182; SpringerLink.
  17. Максимов Р. Д., Битениекс Ю., Плуме Э., Зицанс Я., Мерий Мери Р. Влияние добавок углеродных нанотрубок на физико-механические свойства поливинилацетета. – Библиограф.: с. 360-[362] (34 назв.). – Аннот. на англ. яз. // Мех. композ. матер. – Т. 46, N 3, (2010), c. 345-[362].
    Maksimov R. D., Bitenieks J., Plume E., Zicans J., and Merijs Meri R. The Effect of Introduction of Carbon Nanotubes on the Physicomechanical Properties of Polyvinylacetate. – Bibliogr.: p. 248-250 (34 ref.) // Mech. Compos. Mater. – Vol. 46, No. 3 (2010), p. 237-250; SpringerLink.
  18. Парамонов Ю., Андерсонс Я., Клейнхофс М., Блумбергс И. MinMaxDM семейство распределений для анализа прочности при растяжении однонаправленно армированного композита. – Библиограф.: с. 408-409 (16 назв.). – Аннот. на англ. яз. // Мех. композ. матер. – Т. 46, N 3 (2010), с. 397-[414].
    Paramonov Yu., Andersons J., Kleinhofs M., and Blumbergs I. MinMaxDM Distributions for an Analysis of the Tensile Strength of a Unidirectional Composite. – Bibliogr.: p. 282-283 (16 ref.) // Mech. Compos. Mater. – Vol. 46, No. 3 (2010), p. 275-286; SpringerLink.
  19. Paramonov Yu., Andersons J., and Kleinhofs M. Reliability of a Series of Parallel Systems with Defects. Application of MinMaxDM Distribution Family to Composite Strength Analysis // Computer Modelling and New Technologies. – Vol.14 (2010), p. 15-25.
  20. Портнов Г. Г., Бакис Ч. С. Е., Кулаков В. Л. Передача сдвиговых напряжений на композитный стержень в анкере клеевого типа. 3. Заливочный слой из двух разномодульных материалов. – Библиограф.: с. 217-[218] (12 назв.). – Аннот. на англ. яз. // Мех. композ. матер. – Т. 46, N 2 (2010), с. 199-[218].
    Portnov G. G., Bakis C. E., and Kulakov V. L. Assessment of Transmission of the Shear Stress in Potted Anchors for Composite Rods. 3. Bipotted Anchor. – Bibliogr.: p. 145-146 (12 ref.) // Mech. Compos. Mater. – Vol. 46, No. 2 (2010), p. 133-146; SpringerLink.
  21. Файтельсон Е. А., Гласкова Т. И., Корхов В. П., Анискевич А. Н. Структурные изменения глиносодержащего нанокомпозита с разным влагосодержанием при его деформировании // Инженерно-физический журнал. – Т. 83, N 3 (2010), с. 421-429.
    Faitel’son Е. А., Glaskova T. I., Korkhov V. P., and Aniskevich A. N. Structural Changes in a Clay-Containing Nanocomposite with a Different Moisture Content Caused by Its Deformation // Journal of Engineering Physics and Thermophysics. – Vol. 83, No. 3 (2010), p. 443-451; SpringerLink.
  22. Элксните И., Максимов Р. Д., Зицанс Я., Мерий Мери Р. Влияние малых добавок жидкокристаллического полимера на механические свойства полиэтилена. – Библиограф.: с. 120-[121] (17 назв.). – Аннот. на англ. яз. // Мех. композ. матер. – Т. 46, N 1 (2010), с. 105-[120].
    Elksnite I., Maksimov R. D., Zicans J., and Merijs Meri R. The Effect of Small Additions of a Liquid-Crystalline Polymer on the Mechanical Properties of Polyethylene. – Bibliogr.: p. 87-88 (17 ref.) // Mech. Compos. Mater. – Vol. 46, No. 1 (2010), p. 77-88; SpringerLink.